Print PDF
Favorite
Email
Step 4Making The Storage Tube and Lamp Holder Support
This step describes the tube that elevates the lamp holder and doubles as a storage tube. Slide the lamp holder into the 4" piece of tube so that it stores the holder and cord. Put a wooden plug in one end about 2" from the end and leave the other end open.
When not in use, this tube stores the lamp holder and when in use and converts to hold the lamp up off the ground mounted in the center of the cord reel.
When not in use, this tube stores the lamp holder and when in use and converts to hold the lamp up off the ground mounted in the center of the cord reel.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
