Print PDF
Favorite
Email
Step 2Upright
Cut a 2x6 30 inches long for the upright.
Cut two pieces of 2x4 15 inches long for the support blocks.
Attached the support blocks to the upright 2 inches from the bottom of the upright.
Note: As an alternative, attach the support blocks flush with the bottom of the upright, then the stand could be clamped to the edge of a workbench
Cut two pieces of 2x4 15 inches long for the support blocks.
Attached the support blocks to the upright 2 inches from the bottom of the upright.
Note: As an alternative, attach the support blocks flush with the bottom of the upright, then the stand could be clamped to the edge of a workbench
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
