Print PDF
Favorite
Email
Step 4Holding Bike
The bike can be held loosely up off the ground by the slipping the seat post or seat tube between the open ends of the arms.
If the bike needs to be held rigidly, put a C-clamp over the open end of the arms and tighten to clamp the seat post/seat tube between the arms.
If the bike needs to be held rigidly, put a C-clamp over the open end of the arms and tighten to clamp the seat post/seat tube between the arms.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 9, 2010. 7:27 PMcoltpython
says:
Hell of an idea!, minor variations if need-be, like you could use rigid conduit instead of wood, i think instead of screwing it together, i would use 1/2" holes, top and bottom and send 3/8"X4"? bolts thru, for easy take down and transport. Also at the very end of the top two horizontal boards, put another thru-bolt on the outside of the seat post, once the bike is in place, insert the bolt and tighten down with a wing nut and youre gravy!:)
Reply
 |
Add Comment
|
