Print PDF
Favorite
Email
Step 5Science!
Ok, let's keep going. Using the bit of foam that came with the magazine cover, cut out two pieces that will cover the PCB and stick out about an inch on both sides.
After that, just apply a liberal amount of electric tape to the foam, wrapping around so it keeps the PCB in place and covers up the glare of the foam. Everything looks better in black.
After that, just flip the Screen back so it rests on the PCB and use some more tape to keep it in place. If you want, you can also put some of the plastic sheet with pictures back on it, if only to liven the thing up a bit.
After that, just apply a liberal amount of electric tape to the foam, wrapping around so it keeps the PCB in place and covers up the glare of the foam. Everything looks better in black.
After that, just flip the Screen back so it rests on the PCB and use some more tape to keep it in place. If you want, you can also put some of the plastic sheet with pictures back on it, if only to liven the thing up a bit.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
