With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This tutorial will show how to make a paracord bracelet or watch band using a weaving method. More knot work with releated links and resources can be ...
For this project, you'll need approximately 10 feet of paracord, scissors, lighter, tape measure, hemostats, watch, and a 5/8" side release buckle. I ...
Measure about 20 inches from one end of your length of paracord. This is where you'll loop onto one end of your side release buckle. Once attached, ...
If making as a watchband, this is where you take the strands of paracord from the looped section of the buckle and run them over the watch pin, under ...
Now you begin weaving the long working end of your paracord. The shorter end will be left out until it's time to finish the bracelet/watchband, and t...
Once you've reached the point where your watch will be centered, push the watch tight against the woven cord and bring your working strand thru the pi...
Continue weaving the paracord, keeping a uniform look, and tightening as you go. A pair of hemostats can help work the cord around as you get close t...
To finish up, you'll take the working strand around one of the outer cord, so it's coming thru the under side of the bracelet/watchband. *Check for...
Remove these ads by
Signing Up
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
The watch I used for this didn't have enough space between the pin and the watch for 5 strands. I ended up twisting the working strand underneath the four strands without going under the pins at all.