WowWee's Elvis Alive to The Elivinator Project

Step 39 Making the top of the mold

Let this dry about a 1/2 an hour and then we are ready to make the top part of the mold. Now that the putty is hard lets push out the mold about half way where the mold is coming out from the bottom of the frame, Mix the same amount of putty 4gram of part A and 4 grams of part B. Add more mold release to the inner mold you just made including the inside of the eye. Now mix the putty and this time roll the putty in a tube like shape and insert it into the center of the eye, fill in the eye and the complete edges of the mold.
If you forget to add the mold release you have just stuck the top and bottom layers together and you must cut them apart and start over so don't for get it.