WowWee's Elvis Alive to The Elivinator Project

Step 40 Mold almost finnished

After another 1/2 an hour the frame is ready to be released. Open up the mold half's and remove the eye from the mold, you now have an Elvis eye mold that is almost complete. Next thing to do is to cut out a pour spout so the resin can enter the mold. If you look at the top of the eye you will see a half round section craved out, This is the spot we want to use because we can use a drill bit to clean up the spout. Carve out a V section at this location and also you need to remove half of the inner part of the eye bubble as see in the photos below.