Print PDF
Favorite
Email
Step 46Eye Install
OK, that was not too bad was it?
Now let's install the new Elvinator eye.
First step is to install the eye, do the same thing as you did when you removed the eye, look back if you forgot. One thing has changed since we installed the LED in the eye Yes the wires, wrap the wires around a leg pin that is underneath the large shield that holds everything in place and make sure the wires have enough room to move to the eye to the far right and far left without pulling on the wires: refer to the photo.
Now let's install the new Elvinator eye.
First step is to install the eye, do the same thing as you did when you removed the eye, look back if you forgot. One thing has changed since we installed the LED in the eye Yes the wires, wrap the wires around a leg pin that is underneath the large shield that holds everything in place and make sure the wires have enough room to move to the eye to the far right and far left without pulling on the wires: refer to the photo.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
