WowWee's Elvis Alive to The Elivinator Project

Step 56 Glueing the Skin back on

Now that we have the Jaw finished let's start making the burnt flesh look.
This part is the fun step I really enjoy doing so let's get our supplies ready.
1. Latex rubber for molds or mask latex
2. Latex paint, Black, Red, Purple, Green, Med Flesh, Yellow, White
3. Makeup sponges for adding paint
4. Roll Cotton or Ball Cotton
5. 2" Throw away brush
6. Stage Blood Gel
7. Hot Pour Vinyl #93 from Burman Industries ph# 818-782-9833
8. Small tin to heat the vinyl and a stove that can be used outside

Now that we have our supplies, lets start.
First let's super glue the cut face back on the front of the head. Start with putting the eyebrows back into their sockets and very carefully glue the eye lids back down. Start with the bottom first and then the top. Use a small screwdriver or anything else you have to hold the eyelid in place until the glue dries. It helps if the eyelid is closed. After the eyelids are finished continue to glue the rest of the skin down. When doing the lips make sure they are in the right place so it does not look like its warped. Refer to photos below: