Introduction: Wrap Up Earbuds to Keep From Tangling!

Picture of Wrap Up Earbuds to Keep From Tangling!

Ever have incredibly annoying earbuds that tangle in your pockets! Well, today I am teaching you how to fold these earbuds up so they wont tangle.

Step 1: Step 1: What You Will Need!

Picture of Step 1: What You Will Need!

All you really need for this is a pair of untangled earbuds and a hand!

Step 2: Step 2: the Wrapping Part!

Picture of Step 2: the Wrapping Part!

Make your hand into a rock star/spiderman position (As shown above) And put the earbuds on the edge of the left finger with the earbuds barely sticking out. (As Shown above) Then start wrapping the headphones into a figure 8 until you have about 4-5 inches of headphone cord left.

Step 3: Step 4: You Did It, Almost!

Picture of Step 4: You Did It, Almost!

Now take the remaining cord and start feeding it through the bottom of the cord and then the top, then bottom untill all the remaining cord is fed into a circle.

Step 4: Hooray, You Did It.

Picture of Hooray, You Did It.

You did it, wasn't that hard was it?

Comments

Swansong (author)2017-03-24

That's usually how I store mine :)