This is a quite easy to make knex machine gun. You can hold it with one hand, or with two. It fires only eight bullets but, as aforementioned, it is a beginner machine gun.

V1.0: A small handheld minigun
V1.1 An Even Smaller MG

THIS IS NOT THE MINI VORTEX!!

Piece Count:
66 Gray 1-Slot Connectors
29 Yellow 5-Slot Connectors
21 Blue 3D Connectors
1 Motor Pack
26 White Rods
17 Yellow Rods
28 Orange 1-Slot Connectors
40 Blue Rods
9 Red 3-Slot Connectors
5 Green 4-Slot Connectors
3 Red Rods
26 Blue Spacers
18 Silver Spacers
2 Brown Tabbed Connectors
18 Gray 2-Slot Connectors
1 Gray/Black Rod
2 White 8-Slot Connector
Total: 334 Pieces

(Piece Count May Be A Bit Off)

Step 1: The Handle

This is a Long Step
Pieces:
9 Red 3-slot connectors
18 Gray Connectors
4 Yellow Rods
2 White 8-slot connectors
10 Blue 3D Connectors
8 blue spacers
10 White rods
8 Blue Rods
2 Orange connectors
5 Green 4-Slot Connetors
5 Yellow 5-Slot Connectors
2 Gray 2-Slot Connectors
Total: 83 pieces!

Step 2: The Motor House

A short step that houses the motor for the Gun.

Pieces:
1 Motor
10 White Rods
10 Yellow 5-Slot Connectors
2 White Connectors
8 Green Rods
8 Gray Connectors
2 Yellow Rods
2 Silver Spacers
2 Blue Spacers
4 Blue Rods
Total: 49 pieces

Step 3: The Barrel

This Is a Very long Step. In this step, you will build the part of the gun that fires.

Pieces:
17 Green Rods
16 Gray 2-slot Connectors
40 Gray Connectors
16 Blue Rods
25 Orange Connectors
2 Brown Tabbed Connectors
8 Blue Spacers
16 Silver Spacers
2 White Connectors
1 White Rod
1 Black/Gray Rod
1 Yellow Connector
8 yellow Rods
Total: 143 Pieces

Step 4: Support Parts

This Part supports the barrel of the gun

Pieces:
5 White rods
13 Yellow 5-Slot Connectors
11 Blue 3D Connectors
12 Blue Rods
11Green Rods
3 Yellow Rods
1 Orange Connector
3 Red Rods
Total: 59

Step 5: Attach All Parts

Attach Parts 1-4

Step 6: Firing and Use

To Fire, Press (one) to the (YOUR) LEFT
Hold(Two) in Your Hand, Or also put your other hand on (Three) or (Four)
And Your gun is firing.

To Reload, pull back the orange connector, possibly place theBlue Rod Into position, unless it automatically snaps in. Then place a White rod into the barrel.