With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
55mm E(x60) Class, X985 VIVISECTOR, v18.104.22.168It...Has...Arrived... I'd like to start off this hulk by telling the story of the Vivisector. Originally, It was but a giant, 60 shot ...
The Wheel. This Step is purposely placed first, as I know many of you couldn't care less about the frame. Or you just don't have the pieces to ...
Build this part. If you're only building the wheel, ignore the silver spacers and white snowflakes at the edges.
This is a true PAIN. 2: Build 64. These are singles 3: Build 24. These are doubles. Connect singles to 1,2,4,6 and 8,9,11, and 13 (Grey facing towards ...
Build 56 of the first type And 4 modded with grays and whites. Arrange them like this 1mod - 14regular Keep going and you'll have 4 of those. ...
If at this point, you don't have 2 Terrain Trekker Motors - Turn Back. Anyway, Build these and put them somewhere.
No comment, Just build.
First, stick the loose end of the center into the Shell's snowflake Then, add a blue spacer and Gray connector. Add the Gears... And the Motors
This part borders the rest. 2: Build 2 3: Build 2
Build 8 of pic 2. Put them all over like in pic 3. Add red rods like in pic 4. Build 4 of pic 6. Build 8 of ...
Build 3 of pic 1. Mod 2 with pics 5 and 6. Build pic 11. Attach. The back is done.
Simple enough. Build this.
Build and add a rubber band, like so.
Ugh... Build this big base.
Add the Blues, the Yellows, and the Half-Moons.
Build this... And insert Steps 20-21.
Attach blue rods everywhere and Yellow rods on the bottom.
Build and insert 20-24
Attach the reds, then the triangles, then the lower bricks.
This one is big and droopy (no pun intended).Now you have a pretty Octagon.
First, Blues everywhere. 'Cept that place in Pic 2.Then, reds.And at the bottom, reds too.Then yellows.
Build these and attach.
Add these. If you don't have them, use picture 1....Or don't add them at all. They're there just 'cause they look cool.
Build this little part.
You'll need about 6 feet of thin wire. Or string.Anyway, tie it around The orange piece a few times. Then add that red part. Then tie it around ...
If you want a mobile gun, build these. if not, ignore these steps and use.
Build these ultra-strong triangles.
This is almost identical to the base.
Well, You're done. Get yourself 60 rods and get ready to load. It ends up as approximately 5 minutes.Watch the video to see how to do it fastily.
To turn on, pus the black buttons in. When it's warmed up, pull the blue buttons out. Now pull the string, and see that you've just wasted hours ...
Got problems? PM me and I'll post them here.Thankya to Chris for wasting a day helping me count 6100 pieces, my parents for putting up with 6 months ...
Linkin's Lightning Carbine (LLC) | a K'nex SMGby Linkin_J_Knex
K'nex Machine Pistol: Refuge + Instructionsby CorgiCritter
Small K'NEX pistol by DJHakim
knexbuild S.K.S.P.by headlessknight
The U.K.T.P. (Ultimate Knex Turret Pistol).by ThePwnster
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.