Introduction: XM8 Bolt Action Sniper Mod V2
This gun is pretty powerful with 8 cheap rubberbands BE SURE TO TIE THE RUBBERBANDS TOGHETHER! (about four #64's) Moderate accuracy. Feel free to mod it! My little brother was the first one to touch it....( he wanted credit...)
Step 1: The Mech
1.The entire mechanism
2.The bullet loading area
4.The block trigger
5.the connection point to the firing pin
7.The other side
Step 2: The Barrel
2. Another view of the Barrel
3.Barrel connection to the Firing Area
Step 3: The Stock
2.Top half View B
3.Bottom half of the stock/Butt
4.Bottom half View B
5.Bottom half View C
6.Bottom half View D
Step 4: The Handle
1.Make this. we'll call this guy piece one
3.Make this. We'll call this guy piece two.
4.Make this. we'll call this guy piece three.
5.Add these in
6.Attatch piece one to piece three
7.Attatch piece two to piece three
9.Attach to piece one
Step 5: Firing Pin
2.Do what the yellow boxes say
3.Tape it up TIGHTLY!
Step 6: The Top Rail
1.Top rail pt.1
2.Pt.1 view B
4.Pt.2 View B
5.Attatch Pt.1 to Pt.2
Step 7: The Magazine
1.Make me 2x
2.make me THE Y HANDS ARE NECESSARY!
Step 8: Put It All Together
1.Attatch the Firing Area onto the Handle
2.Ramrod into the Firing Area
3.Back of the Firing Pin into the Handle
4.Attatch the Sides into the Firing Area
5.Attatch the Barrel into the Firing Area
6.Stock Into the Handle
7.The other end of the Stock into the Handle
8.Top Rail into the Butt
9.Another part of the Top Rail into the Stock
10.The middle of the Top Rail into the Firing Area
11.The front of the Top Rail into the Barrel
Step 9: SHE IS COMPLETE!
We have a be nice policy.
Please be positive and constructive.