With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
In this Instructable, I will show you how to make a 'LEGO Mindstorms' carrier to hold your wireless xbox 360 controller for you while you walk around, (or ...
Here are some Images of me wearing the carrier with an xbox 360 controller in it.
You will need to make the 2 items in the first picture. The second picture shows the pieces in more detail, before they are put together.
The first picture shows the relevant pieces, the second picture shows how to assemble them.
Add the 2 pieces together that you made in the previous 2 steps, it should look like the image shown here.
Collect the pieces shown in the first image and assemble them as shown in the second image.
Now put the pieces that you have created together in the places shown in the first image, When stood up, it should look like the piece shown in ...
Assemble the 4 pieces shown in the first image and assemble them with the other longer piece shown in the second image.
attach these pieces together plus the piece right at the bottom of the image in the centre.
Add the pieces in picture one together to create the item in picture two.
Attach all the pieces together to look like the image shown here
Attach the pieces in image 1 to make the pieces in image 2. then attach these to the pieces in image 3 so that they look like imgage ...
Cut a small piece of plastic tubing, (this does come with some LEGO Technic and LEGO Mindstorms sets). This piece must fit snuggly between the yellow pices as ...
Collect the pieces in image 1 and push them through the carrier in order so that it loks like image 2.
You have how completed this Instructable! If you don't have all the pieces, just try to improvise. If you have all the pieces and you have made this, ...
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.