Print PDF
Favorite
Email
Step 2Set up a network.
You must first set up a network so you can transfer things to the xbox.
Type A:
1 router
2 straight-though ethernet cords.
1) Connect your internet cord to the uplink (optional, but necessary if you still want to connect to the internet, unless you connect through some other means)
2) Take the two cords, and place them in the router.
3) Place in the computer and Xbox.
Type B:
2 ethernet ports on computer (1 if not connecting to internet through an ethernet cord.)
1 cross-over cable (not a normal ethernet cable)
To do this you simply put the two ends of the crossover cable into the two devices.
Type A:
1 router
2 straight-though ethernet cords.
1) Connect your internet cord to the uplink (optional, but necessary if you still want to connect to the internet, unless you connect through some other means)
2) Take the two cords, and place them in the router.
3) Place in the computer and Xbox.
Type B:
2 ethernet ports on computer (1 if not connecting to internet through an ethernet cord.)
1 cross-over cable (not a normal ethernet cable)
To do this you simply put the two ends of the crossover cable into the two devices.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Oct 30, 2007. 10:06 PMbenisnt
says:
do you need to do this if you have the usb
Reply
1
Oct 31, 2007. 2:11 AMFMunkey (author)
says:
It is the only way with this type of mod to get the initial files transferred. Once you get something with a file explorer in it you can transfer files off of a flash drive or other usb device with an easy to make usb to xbox connector, which is essentially the opposite what had to be done for the controller.
Reply
 |
Add Comment
|
