Introduction: Xenon XR-14 High Range Pistol
High range bolt action pistol. This gun is very simple to make shoots very far. With a sharpened stick, it can go straight through a piece if cardboard. The design is all mine except the handle which I borrowed of the Auto Loading Assault Pistol. Has a very simple block trigger mechanism. It has a 6 round hopper secured by rubber bands that also close the roof so the blue rods can't fall out.
Step 1: Building the Barrel, Trigger & Firing Pin
Build what you see in this order. If it doesn't look like it works, persivere.
Step 2: Other Bits
Some various bits. Build what you see.
Step 3: Handle
This is the handle. Build what you see.
Step 4: Put It Together
You will now put it together. Do what you see.
Step 5: Elastics
Put the rubber bands on as follows
Step 6: Hopper
Make the hopper. Build what you see.
Step 7: Firing
Put six blue rods into the hopper. Pull out the firing pin. Open and close the hopper lid to push the rod into the firing tube. (You only need to do this once if you have got six rounds in.)
Pull down the blue trigger and it will fire!