Print PDF
Favorite
Email
This is a slideshow how to on changing out the front turn signals ona vino 125 scooter.
Remove these ads by
Signing UpStep 1Roavoe front bolt
Remove the bolt on the front of the headlight assembly, yours will be a phillips screw head. I HIGHLY reccomend switching it out for a hex head bolt like mine.
NOTE: If this it your first time removing this screw now that it is VERY hard to turn, you are best using a manual impact driver so you do not strip it out.
NOTE: If this it your first time removing this screw now that it is VERY hard to turn, you are best using a manual impact driver so you do not strip it out.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
Nov 11, 2008. 8:11 AMkentwidman
says:
Great tutorial, but I'm having problems finding a vino replacement turn signal, same as in your pictures. Could you mention where you got the part from? thanks :)
Reply
May 23, 2009. 8:50 AMawomer
says:
I ordered mine online from Power Parts Plus. Cost me $12.95 plus shipping. They seem to have pretty much any Yamaha parts you're looking for. www.powerpartsplus.com/
Reply
 |
Add Comment
|
