Print PDF
Favorite
Email
Step 4Handle
Although simple in concept, this piece is hard on the hands. There's no good way to do it.
1: You'll need to stick 18 white snowflake connectors onto 4 red rods. Play around with it until they all go on.
2: Stick one red rod loose in the middle.
1: You'll need to stick 18 white snowflake connectors onto 4 red rods. Play around with it until they all go on.
2: Stick one red rod loose in the middle.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Nov 6, 2007. 1:57 PMyugimon
says:
you do no -well apparently not- that there is an easier way to snap them in just get a flat head screw driver and a hammer and hammer it in. does NOT break the pieces either note: result may lead into marked knex rods- nothin to worry about.
Reply
 |
Add Comment
|
