Print PDF
Favorite
Email
Step 7Magazine
1: Make these. Note that one of them has blue donuts.
2: Insert 8 yellow rods. The ends are highlighted in pink.
3: Connect your two pieces together like this.
4: Now, flip this assembly upside-down and connect it to the barrel. Note that the side with the blue donuts is closer to the handle.
Set this aside.
5: Make these.
6: Connect them together with blue rods and donuts.
7: Add more blue donuts and tan hubcaps.
8: Finally, flip the gun upside-down. With any luck, the piece you just made should slide right into place, and lock in with the light gray connectors.
2: Insert 8 yellow rods. The ends are highlighted in pink.
3: Connect your two pieces together like this.
4: Now, flip this assembly upside-down and connect it to the barrel. Note that the side with the blue donuts is closer to the handle.
Set this aside.
5: Make these.
6: Connect them together with blue rods and donuts.
7: Add more blue donuts and tan hubcaps.
8: Finally, flip the gun upside-down. With any luck, the piece you just made should slide right into place, and lock in with the light gray connectors.
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
6
Feb 7, 2008. 5:14 PMlunchboxrc
says:
o
Reply
6
Feb 6, 2008. 8:19 AMlunchboxrc
says:
whyd you make them pink?
Reply
4
Feb 7, 2008. 4:13 PMT3Hprogrammer (author)
says:
that's just the flash, they arent really pink
Reply
 |
Add Comment
|
