Introduction: Yet Another Home Made Beer.

Picture of Yet Another Home Made Beer.

Notice: Almost done: just have to add some pictures.

We have made wine before, but never made beer. To be honest, I detest the taste of beer. We set out to make something that could be palatable by all.  We have made several departures from the regular beer making method. We wanted to use what we had on hand. such things as the traditional hops are not used. In our research, we found this departure was done quite a lot.Beer and wine making ore sort of alike in an oversimplified way, but beer is a bit more involved.

Make beer  in a coffee make see:  https://www.instructables.com/id/Coffeemaker-meals-and-etc/

Step 1: Sweet Extraction Bath.

Picture of Sweet Extraction Bath.

Traditionally from what understand is that 170 degree Fahrenheit water is showered over the base malts and raw meal which is then collected. Here we are going to give our base of good old fashion oatmeal a bath in 170 degree Fahrenheit water and then strain the liquid out of the mixture instead. probably need to strain it twice. once to get out the thick stuff and then a second time with filter paper to get out the residue so the liquid is as clear as possible.

Note: Throughout this whole process, make sure your equipment is clean!!!

Step 2: Flavor Bath.

Picture of Flavor Bath.

Now we are going to use the strained liquid from the first step, but add some herbs such as oregano, basil, and maybe onion powder. Whatever the final ingredients, it should be very interesting. This mixture we will boil twice. First for the bitterness and secondly for the flavor.

We will boil this mixture sometimes known as wort for about an hour. We will add our ingredients in three stages.

At the start: 1 cup lemon juice.
Twenty minutes to the end, the spices all but the oregano. (we are using basil and several secret herbs.)
Five minutes to the end, we will add the oregano..

Note: Watch carefully or you might have a boil over accident.

Step 3: Fermenting.

Picture of Fermenting.

At this point we will add the yeast for the mixture to ferment. We made a bit of sweetness to aid in the fermentation of the beer. This usually takes about two weeks. You will want to add an airlock to let out the carbon dioxide so the tank is less likely to explode from the pressure created during the fermentation.

Note: Plants love carbon dioxide. That is why when you talk to your plants they grow better. The plants are just feeding off the carbon dioxide.

Step 4: Carbonization.

Picture of Carbonization.

Now the liquid mixture is transferred to the carbonization tank being careful not to transfer any of the remnants of the fermentation process.  Can be thought of as a second fermentation but no yeast is added. we might add a little sugar to get the last bit of additional taste.

Step 5: The Tasting.

Picture of The Tasting.

Time to taste and the bottle the beer! Then right into the fridge.

Comments

About This Instructable

1,242views

13favorites

License:

Bio: Like learning food basics.
More by davijordan:Easy tie clipYankee MoogoogaipanChoctaw Fry bread.
Add instructable to: