Print PDF
Favorite
Email
Step 2Snap the blades
First take the junior hacksaw blades and snap off the top and bottom then snap the blade in half.
If the blades are cheap they may bend more than snap so try and keep the bending of the piece you'll be working on to a minimum by holding the side you'll be working on in a pair of pliers as you bend it.
If the blades are cheap they may bend more than snap so try and keep the bending of the piece you'll be working on to a minimum by holding the side you'll be working on in a pair of pliers as you bend it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
