Introduction: Yo-Yo Earbuds

Picture of Yo-Yo Earbuds

Did you ever experience the feeling of frustration when you want to listen to your favorite music and find out your earbuds all tangled up.

There's a lot of gadgets on the market to fight this problem, so why not make our own simple and cheap DIY style.

In this project i show you how to.

Step 1: Watch the Video

Picture of Watch the Video

Watch the video and see how easy it is to make this project step by step and how it works.

Step 2: Gather the Material

Picture of Gather the Material

You will need for this project:

- Two Bottle Caps

- A Piece of PVC Pipe

Step 3: Get Started

Picture of Get Started

Grab a small piece of PVC pipe with 1 cm in diameter and 2,5 cm in length and hot glue to one of the caps.

In the other caps make a small cut on the edge to lock the jack plug, and hot glue the two pieces together.

Let the glue set down and it's done!

Step 4: Final Thoughts

Picture of Final Thoughts

This is a simple hack reusing bottle caps to keep your earbuds wires from getting tangled, you can use also with the cell phone charger and other things.

Tell me on the comments below what applications you will use this for.

Please subscribe to my YouTube channel

And follow me on Instructables

Thanks for readingYou're still here, go and make this project!


mrgw98 (author)2016-01-02

Wonderful idea! I am glad you posted this! Also using bottle caps instead of an actual yoyo was a great idea too. That gives it more space to hold the cord.

Ploopy (author)2015-03-25


Engineer of None (author)Ploopy2015-03-25


Coldfire1215 (author)2015-03-11

A very nice way to keep earbuds safe.

Thanks for the comment

Gruntbug (author)2015-02-21

very nice and super easy

Thanks! Give it a try it's very useful.

About This Instructable




Bio: Why pay for stuff when you can make, build, hack, macgyver it. They are better and cheaper 100% DIY.
More by Engineer of None:Holmo Lamp IR Controller HackEDC Bit ScrewdriverLazy Pc Power Button
Add instructable to: