Print PDF
Favorite
Email
Step 4Yoshi Head (Glue Styrofoam)
I used the PL300 Foamboard Adhesive that I picked up from Home Depot to glue together the pieces of styrofoam. The adhesive was ok, but it took too long to dry (24 hours). At this point I had not found the odorless CA glue. Of course the CA glue is way more expensive, so the adhesive might have been the better option?!?
After gluing all the pieces together I put something heavy on top of the stack.
(The picture is after I started carving but you get the idea).
After gluing all the pieces together I put something heavy on top of the stack.
(The picture is after I started carving but you get the idea).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
