Introduction: Your Own Homemade Ipod Nano 4th Generation Case Out of a DS Case

This Title Probley Sounds Awsome,Cool and fun ...It would take an hour or 30 min depending in you rush or take time(for better quality)..Let's get started>>>> :D TELL ME HOW YOURS TURNED OUT WHEN UR DONE!!! THIS IS MY FIRST ONE SO CHILL !

Step 1: 1: Stuff Your Gonna Need!

ALL THE THINGS YOUR GONNA NEED ARE RIGHT BELOW THIS!!

SCISSORS 'SHARP'
HOCKEY OR MASKING TAPE
A DS CASE WITH 3 DS CARD HOLDERS AND WITH A BAND THAT  'HELD' THE DS!
STAPLER
markers 'essential'!!!!!!!

Step 2: ZIPPER

CUT OF THE ZIPPER THAT GOES AROUND THE SIDES THIS SHOULDN'T BE THAT HARD IF U HAVE SHARP SCISSORS!

Step 3: STAPLER + BAND=


SO now u take the band and staple it at the ends of the band it should be able to strech around it ...it is also supposed to be tight!! very tight so it dosn't slip out if it does then re staple it !

Step 4: The HARD PART!

haha JK... So your gonna want to cut the strings in side the ds game holders  but not the outside ones that hold it in place just the inside strings ...

Step 5: TEST IT OUT

NOW JUST SEE IF THE IPOD IS IN PLACE AND IS NOT MOVING ..THATS GOOD IF IT'S NOT IF IT IS RE-STAPLE THE BAND!!!!!

Step 6: THE TAPE COMES IN NOW!

NOW take the tape and tape it until the end of the corners and the sides.LISTEN TO THIS TAPE IT STRAIGHT OR SIDE WAYS STRAIGHT IS ALOT EASIER!!

Step 7: LAST STEP!!

once finished taping it take a apple sticker and put it in the side,middle anywhere where the tape is and put it there then tape the putside of the apple not the inside of it!

Step 8: ONLY IF U HAVE a MARKER!

TAKE A MARKER AND DO A DESIGN ON THE APPLE WITH THE SAME COLOUR AS YOUR IPOD!