Print PDF
Favorite
Email
Step 7Door Frame
The door frame is made from chunks of ash hockey sticks.
They fit together with mortise-and-tenon joints.
I rounded the protruding ends at the top so as to not poke through the cover.
I made my door frame a trapezoid shape because I had a theory about making the base of the wall wider than its top. That was an unnecessary complication.
Make yours rectangular. Then there's no left-right-top-bottom problem.
The inside dimensions of the assembled frame are 24" wide at the top and 40" vertical.
The sticks are 1" wide and 3/4" thick.
They fit together with mortise-and-tenon joints.
I rounded the protruding ends at the top so as to not poke through the cover.
I made my door frame a trapezoid shape because I had a theory about making the base of the wall wider than its top. That was an unnecessary complication.
Make yours rectangular. Then there's no left-right-top-bottom problem.
The inside dimensions of the assembled frame are 24" wide at the top and 40" vertical.
The sticks are 1" wide and 3/4" thick.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
