With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Transform a victim into the walking dead. Loads of fun for parties, photo shoots, or just hitting the drive thru. Superawesomeamazing photos: Raphae...
Temptu Dura Palettes- Corpse, Trauma Temptu Dura Liquid Kits- All Skin, Burn, Corpse 99% Alcohol Setting powder appropriate for your model Creme color...
Apply rings of prosaide to model where you want "tear away flesh." The open space in the center of the ring will be painted red later. When prosaide...
After warming gelatin, test on your wrist to make sure you don't accidentally burn your model. HINT- If you can't hold the bottle in your hand comfor...
Once the latex is dry and the gelatin is set, powder the latex tear-away flesh, the gelatin bite, and the latex gore with setting powder appropriate f...
Use prosaide and bondo (thickened prosaide) to blend the edges of the tear away flesh. Apply, wait until dry, and powder. Repeat until edges are ble...
Use the Dura Palettes to apply an undercoat that matches the model's natural skin tone. If your setting powder for the gelatin did not blend well eno...
Using an airbrush and dura liquid thinned with 99% alcohol, apply a thin, thin, thin wash of green. This will neutralize the red tones of the skin, a...
Using Dura Liquid in Rigor Mortis thinned to a wash for 99% alcohol, apply shadows under jaw, in hallows under cheekbones, at temples, and in eye sock...
Highlight the area around the orbits of the skull, browbones, and neck using an airbrush with Dura Liquid. I used 001 Porcelain.
Using a small flat brush and bright red creme color, line the upper and lower lids and blended well. I then added maroon very close to the last line ...
Spray 99% alcohol on a rag and wipe excess makeup off the eyebrows. Don't soak the rag, and don't wipe the skin.
Pull on the tear-away flesh to create some ugly, festering, sores. Make sure the edges are uneven, and that the sores hang open.
Paint the inside of the sores and the underside of the open skin with red from the dura palette. Paint the entire interior of the neck wound and the ...
Use a dark red or purple to add depth to the wounds. Focus on the interior edges where the fake skin meets the real skin, and the deep parts of the g...
Stipple red and rigor mortis from the dura palettes to create bruising around the wounds. Leave a "halo" of uncolored flesh to create a more 3-D effe...
I like to use the same colors from the dura palette to get a good match. Make sure it doesn't look like kool-aid! A little brown goes a long way. ...
I mixed Ben Nye tooth color on a palette and applied with a brush. Work fast; it dries quick! Also, be sure to dry the teeth thoroughly first. Have...
Dispense "Fresh Scab" onto palette. Pack into wounds, but leave high parts of neck gore exposed. It will dry and be kind of crusty. I also added so...
Like the skin gelatin, the blood gelatin will cool to a hard, flexible surface. Add drips and smear. Make sure to test first so you don't burn your ...
Enjoy your wicked creation!
Remove these ads by
Signing Up
Not NiceInappropriateSpam1,435 views
11 favorites
Posted:
May 13, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »