Introduction: Adamsdead Rifle Mods

Picture of Adamsdead Rifle Mods

these are the mods i made to adamsdead rifle. he said i could do this. this is not a copy, just an upgrade. also this is my fisrt inscructable. each step is a new mod

Step 1: Auto Lock Mod

Picture of Auto Lock Mod

this is the easiest mod. just ring the rubberbands through the hole and over the three red rods over the end. make sure that it goes over all three otherwise the rubberband will get in the way of the ammo

Step 2: Scope Mod

Picture of  Scope Mod

this ones more difficult and may kill your hands.take off the blue rod,(it was supposed to be white but i did blue) and green connectors.ttach the scope. u can make the scope by looking at the picture

Step 3: True Trigger Mod

Picture of True Trigger Mod

this one isn't too hard. just put a rod through the orange/black connectors. make the trigger. put it through there and attach a string to the true trigger and old block trigger. also on the orange/black connectors in the front put a rod and put the string under that. this will insure that the block trigger is pulled down and not side ways.

Step 4: Done!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Picture of Done!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ur done. please rate and comment. there is a forum very similar to this.


mutt256 (author)2008-10-04

look like that ww2 russian sniper

Hellchild (author)mutt2562009-02-21

what model?

mutt256 (author)Hellchild2009-02-21

mosin naget

Hellchild (author)mutt2562009-02-22

oh, Yeah it kindof does

thebboy (author)mutt2562008-10-05

ya, kinda does.

guy-man (author)2009-01-18


thebboy (author)guy-man2009-01-18

what do you mean?

MI6 (author)2008-09-02

scope is too 'busy' - but otherwise nice mods to a nice gun.

thebboy (author)MI62008-09-02

what do you mean?

MI6 (author)thebboy2008-09-03

Its just that i made some nice mods on this gun, although i didnt post them. Nice try to put a scope on and it looks good but it needs to be simpler, with fewer peices - easy and clear to look through. I made a few mods to the firing pin myself ; try putting two yellow rods on it instead of one blue and put grey connectors like in picture 2 just before it to stop it lifting up so much .

thebboy (author)MI62008-09-03

humm, not a bad idea, but i kind of took a break from knex, so i won't actually ever attempt it.

ForteZeroExcell (author)2008-01-26

Can you explain the auto lock mode in more detail plese ? I dont get how that stops the ammo ?PLZ Help nice mods by the way!

thebboy (author)ForteZeroExcell2008-01-26

do you mean how to make it, or what it does? it makes it so that the trigger atomatically becomes set when the ram is pulled back without using extra rubberbands.

ForteZeroExcell (author)thebboy2008-01-26

ohh...sorry i thought you meant that you could stop the ammo falling out when you tip the rifle down Thanks anyways

thebboy (author)ForteZeroExcell2008-01-26

no, although my ammo doesn't seem to do that even if i tip it down. weird.

ForteZeroExcell (author)thebboy2008-01-27 other words you are imune to gravity ! LOL

thebboy (author)ForteZeroExcell2008-01-27

ya i'm magical.

ForteZeroExcell (author)thebboy2008-01-30

If you're magical cough up some money for me! LOL ! By the way have you built Gorkems Sniper Rifle.I just finished building mine a minute ago !!!!

thebboy (author)ForteZeroExcell2008-01-30

i would, but i don't really have the time. i've made a lot of other stuff though.

ForteZeroExcell (author)thebboy2008-01-31

like...? What guns what would you reccomend ?

thebboy (author)ForteZeroExcell2008-01-31

i made the dual knex pistol set (by perfect duck), the adamsdead rifle, mepains sword, a sweet big guitar, Knex mp5, jsacps butterfly knife, and the swicthblade knex knife and a few other stuff that i can't remember now. I made the guitar by myself.

ForteZeroExcell (author)thebboy2008-02-01

can you post instruct on the guitar it sounds really cool !

thebboy (author)ForteZeroExcell2008-02-01

that definetly would have been my first instructable if i hadn't tooken part of it apart. I can probably put it back together in the future. maybe after my next big knex project.

ForteZeroExcell (author)thebboy2008-02-02

what's you big project ?

thebboy (author)ForteZeroExcell2008-09-02

well, not anymore. now i kinda took a break from knex

thebboy (author)ForteZeroExcell2008-02-02

i'm making jsacp's katana

Oompa-Loompa (author)thebboy2008-07-21

There musy be a lot of friction in the barrel

thebboy (author)Oompa-Loompa2008-07-22

ya, sorta.

I mean must, not musy. lol

thebboy (author)2008-01-26

i just added a detail yellow box thing describing where the hole and three rods are if your having trouble.

J_SCAP (author)2007-10-18

no scope for me im a vegatearian

killerk2 (author)J_SCAP2007-10-20

lol, im just worried about me edjamacation

disaster (author)killerk22008-01-04

Lmao youre soo funny :P

the_burrito_master (author)2007-11-26

cool all though I have never built that gun. ; P


thebboy (author)2007-11-21

dang noones rated this instructable yet.

knex master (author)2007-10-19

knex nitro automaticThis is my gun nice mod by the way

thebboy (author)knex master2007-10-20


dsman195276 (author)2007-10-18

darn i just posted a forum for my mod. i had all of these

thebboy (author)dsman1952762007-10-18

sorry i didn't know

Whaleman (author)2007-10-18

This is better suited as a forum, as it does not instruct.

About This Instructable




Bio: I'm 14 years old, 'm a guy, i'm pretty awesome most of the time, and i really like dancing. Boogaloo, krumping, breakdancing (i ... More »
More by thebboy:Antiyo contest entry by thebboy: stop and goHow to do a Basic Freezeadamsdead rifle mods
Add instructable to: