Airgun Pellet Mould From Cheap Pliers

materials.

1) pliers

2) 2pcs. dill bits ( 1 smaller than the cal. and the other the same as cal.)

3) vice or vicegrip

4) drill

Step 1:

clamp the pliers with a vice grip

Step 2:

make a punch on the desired location.

Step 3:

drill the pliers using the small drill bit.

Step 4:

make sure that you do not drill through. once in a while open the pliers to see your progress.

Step 5:

again clamp the drilled pliers.

Step 6:

drill the opening with the big drill bit with a depth of 1mm or more.

Step 7: