in this instructible, i will show you how to make an airsoft ammo holder out of a pen tube and a pill bottle.

Step 1: Materials

1)9/32" drill bit
1)drill
1)bic pen&pen cap
1)pill bottle
1)pliers(needlenose)

Step 2: Step 1

drill a hole in the top of the pill bottle cap. make sure the pen can easily slide in and out!

Step 3: Prepare Pen

1)take your bic pen and get the ink out. 2)after you get the little thingy out of the back (i cut the end off) take the pliers and bend the tip of the pen into a horn type thing...

Step 4: Attach the Pieces!

pretty self explanitory title.just unscrew the pill bottle,fill bottle with bbs, insert pen through bottom of pill bottle cap, and put the pen cap on the open end to seal off the opening!!!then, if you want to use it as a magazine for Gibson_sg_95 's https://www.instructables.com/id/Ultimate-Bic-Airsoft-Gun/ :just attach the open end of the pen to th pen cap ON THE PEN GUN.