this is an instructable about how to make a airsoft rocket launcher. I hope to add a video soon. (don't make fun this is my first instructable.) the rocket will go 50 feet. you can use a ball that fits or something else but the rocket goes farer then the rest.(the tennis balls do not go that far only 15 feet at the most.)
the whole thing costs about 15$ I went to ace hardware to get the ingnitor and homedepo for the pvc tubes.
please remember to leave a comment
Step 1: Materials
you will need different lengths of pvc pipe one 2 foot, one 1 foot, and one that will be able to squew into the 2 foot. you will also need a weber original igniter kit. also you will need hairspray. you spray hairspray in the back for 7 seconds.
Step 2: Tools
you will need pvc glue and a saw
Step 3: Step 1
first get your one foot piece of pvc and use the glue to glue it to the 2 foot pve pipe. 2 get the piece of pvc that can screw togther and glue it to the back of the 2 foot pvc.
Step 5: Step 3
make a hole in the 2 foot pvc in the middle to fit the igniter box and cover the hole with duck tape. (try to make it fit as tightly in the hole as you can.
Step 6: Step 4
put the rocket in the front of the pcp and unsquew the back spray hair spray in the back and quickly close it. hold it on your shoulder and push the igniter button. it will make the rocket go about 50 feet.
Step 7: You are now done
you have finished
Step 8: My next instructable
say yes in the comments if you want to make my semi fully auto rubber band gun.