Introduction: Altoids Clock

By
About: scholarship to ERAU, going for pilot's lisense when I'm 16 prefer to read html rather than page shot a twizzler with a bb gun from 10 ft.ect...

A new mod for an old favorite.

Step 1: Gather Materials

You'll need a(n);
cheapo clock,
battery for clock,
Altoids Sours tin,Awl,
and packing cardboard(
the thin stuff)
for a spacer.

Step 2: Make Room for Clock

Eat all the Altoids and use the
awl to punch a hole towards the
bottom of the O (in the center).

Step 3: Make the Spacers

Cut two pieces out of the piece of card board and put them on the bottom of the tin.

Step 4: Put in the Clock

Put in the clock.(duh)
Then trim the hands of the clock so they are about;
1" for the second hand,3/4"for the minute hand and 5/8"
for the hour hand.

Step 5: Batteries

You get the idea.
Now for a vid.

Attachments