Print PDF
Favorite
Email
Step 9Release the dock
When the resin is hard enough, you can take apart the mold.
The surface could still feel a bit sticky, but that's ok.
Now you carefully pull out the nano copy. It will feel like it's unmovably, but you just have to pull it a bit to each side several times until it looses contact to the resin.
The surface could still feel a bit sticky, but that's ok.
Now you carefully pull out the nano copy. It will feel like it's unmovably, but you just have to pull it a bit to each side several times until it looses contact to the resin.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
