audio bathroom graffitti box

Step 5 Tape stuff down

now, you need to push the battery connecting wire through the hole you've made from front to back.

next, tape down all the electronics on the front. we also use a little super glue. just make sure it pretty secure but you don't need to cement it or anything.

leave the speaker untaped though

cut out pieces of posterboard where the buttons are.

now, cut a slit in one piece of posterboard and pull the speaker through.

now tape one of the pieces of posterboard over the whole thing.

if you did it right, the speaker and buttons should be visible but none of the styrofoam on top.

glue the speaker to the piece of posterboard