Introduction: Barrel Speaker

Picture of Barrel Speaker

40l blue barrel with a road cone base to mount driver in

Step 1: Get a Plastic Barrel

Picture of Get a Plastic Barrel

Step 2:

Step 3:

Step 4: Get a Road Cone and Cut Off the Cone and Keep a Few Inches of It for Mounting It in Barrel

Picture of Get a Road Cone and Cut Off the Cone and Keep a Few Inches of It for Mounting It in Barrel

Step 5: Mount Speaker Into Base of Road Cone

Picture of Mount Speaker Into Base of Road Cone

Step 6: Slot Cone Into Barrel and Screw Up Around Barrel Rim to Hold in Place

Picture of Slot Cone Into Barrel and Screw Up Around Barrel Rim to Hold in Place

Step 7: Barrel Stack

Picture of Barrel Stack

Step 8:

Picture of

Comments

BenJ30 (author)2015-10-30

it's ment to say 15" driver fits barrel

BenJ30 (author)2015-10-30

the stack had 6 12" 250w rms drivers in it is really loud I found some old road cones lying around if you get a 60l barrel you can fit driver directly to barrel without road cone these are sealed units I want to see what there like ported had my old house shaking from the bass

About This Instructable

224views

3favorites

License:

More by BenJ30:barrel speaker
Add instructable to: