a cool looking paper plane that flies really well(thro it staight up and the flight rocks!
Step 1: Grt the Paper!
take piece of computer paper and fold on the line, then unfold.
Step 2: Fold
know u have a diagonal crease in the paper, fold the opposite of that so it makes an "x", then fold the x in half as shown.
Step 3: This Is Tricky!
no flip the paper over and there should be a point in the center of the x , push that down and fold the two middle lines to the center,no sqiush the pop up part down.it should look like this, if it doesn't the examine this pic closely, i bet u will figure it out.
Step 4: Making the Body.
fold the two flaps up to look like this.
Step 5: Again
now fold those flaps down as shown
Step 6: Tricky
fold the thin part until u get to the thick part.do this on both sides.
Step 7: Pinch It
pinch the thin and thick together as shown,now fold that piont down like this.dothis on both sides.
Step 8: Simple Fold
now fold the top of that point behind the plane(you r looking at the back of the plane).
Step 9: Go to the Bottom
now on the bottom thers a strip about 3 inches wide tear or cut that in half.like this
Step 10: Halfs
now fold that in half the long way. then with the crease facing u , fold that half in half do the same on the other side. this is the bottom of the tail.
Step 11: Rip It Up
about an ich from the tail rip to the crease on bothe sides as shown.
Step 12: Final Step
as shown insert the tail into the body like this,this is the best plane i have ever made so enjoi it.
Step 13: Tips
you can adjust the wings by foldinthem at different angles or folding the tips up as shown