Picture of bolt action knex pistol with hopper
Photo 175.jpg
a fine knex weapon!!!!!
shoots up to 75 feet with 3 or more good rubber bands.

hopper can hold 6 shots max.
this gun shoots blue rods.
easy gun to make.

i added a video on how to reload and fill hopper...

i give alathald credit for the barrel and trigger.


Step 1: The handle

Picture of the handle
Photo 178.jpg
Photo 179.jpg
Photo 180.jpg
build the handle from these pictures
1-40 of 153Next »
i am only 10 and i can make much better things

Thats an understatement, when I was 5, I could make something better than this.
this gun is awesome! I had to move the handle foreword though, my hand is so small!
mom1234 years ago
the hoper jams and how do you prevent the amo from coming out

bhuty4 years ago
what is the difference between a hopper and a mag
A hopper is like a funnel that narrows bullets into the receiver holds up to about 30-50.
A mag is a guided path with a mag push, the mag push "pushes the bullets up in the receiver.
stevenh4295 years ago
weird trigger
i agree
i think the trigger is for decoration
skyfaller4 years ago
The ''blue'' thing is supposed to be a yellow/grey half moon connector. In this case, its yellow, grey AND blue.
wait..........i think its a green peice
Yea, i don't know. I just didn't add it, the gun worked fine. I scrapped it though, i don't even know why.
KalinduW774 years ago
If you are going to make instructions explain everything in detail please
LaxMonkey6 years ago
In your first pic, what kind of piece is in between the white connecters furthest right? it looks blue but i have no idea what piece it is.
thehoyboy4 years ago
i like this pistle/rifle alot especially the hopper part
st j6 years ago
lks cool nearly broke my pinkie
thehoyboy st j4 years ago
i know
skyfaller4 years ago
IF you guys have extra green and white rods, make the hopper bigger.

Its alot better for a war.
yes please make em easier to understand as im currently losing my rag with it as the bolt keeps flinging out *nearly breaks gun*
Tape the orange connector to the red rod.
disney0106 years ago
what piece do you use to keep the white rods from not falling out
orange connecters
ownedintheface (author)  disney0106 years ago
grey 1 way connectors. they are purple sometimes too
The fourth picture isn't of the barrel, what is it?
the handle
I modded it to be for a lefty... all u have 2 do is reverse the pump & trigger.
i love the gun it is perfect after i modded some stuff like the mag i made it less flimsy and bigger
kakarot12345 years ago
difficult to understand but you can pretty much figure it out in a while
kmanv35 years ago
um is there a way that i can make it go in my left hand?
nuttyboy8125 years ago
they all bw white i can tell by the space but they have blue ones for some crazy reason
rec0n5 years ago
is this true bolt action?
pie25x rec0n5 years ago
Almost. A true bolt action loads a bullet and cocks (lol) the firing pin at the same time.
rec0n pie25x5 years ago
are there 2 firing chambers?
pie25x rec0n5 years ago
rec0n pie25x5 years ago
look at Zak's BA or DJ's BA .
pie25x rec0n5 years ago
BA or P.U.?
There can be only one firing chamber, unless it is a shotgun. This gun does seperate the round from the mag, though.
CODKING5 years ago

Ok once i finished wich only took a few mins. It was working well untill about 5 shots. then the firing pin would get to the bullet and just move up words so it wouldnt shoot any more but a great gun


smegz5 years ago
its awesome!!! but i added a rod going through the 2 snowflake connectors where the ram rod is so that it stays put much easier,,,i enjoyed this gun very much,,,good loading speed and speed between sots is less than a second or two if trying to shoot quickly rather than accurately,,,:)lol
1-40 of 153Next »