Print PDF
Favorite
Email
Step 2Tools needed
these are theýtools youýneed:
wire (I usedýsteel 18 gage)
wire cutters
needle noseýpliers
1/16" hole punch
cut the wireýto these lengths:
3 pieces ofýwire 19" long
5 pieces ofýwire 16" long
4 pieces ofýwire 22" long
AND FOR SAFETY you should wear safety goggles so you don't poke your eyes with the wire, and gloves so you don't get too scratched up.
wire (I usedýsteel 18 gage)
wire cutters
needle noseýpliers
1/16" hole punch
cut the wireýto these lengths:
3 pieces ofýwire 19" long
5 pieces ofýwire 16" long
4 pieces ofýwire 22" long
AND FOR SAFETY you should wear safety goggles so you don't poke your eyes with the wire, and gloves so you don't get too scratched up.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
