Instructables
Picture of build a digital pin-hole camera
I always wanted to try making pictures with a pinhole camera, but it was one of those things I never quite got around to. Now with digital cameras its easy.

You will need a digital single lens reflex (SLR) camera with an interchangeable lens, some black card stock, a pin, black tape, scissors, and a way to replace the lens with a piece of black card stock with a pin hole in it.

You could just take off the lens and tape the card with the hole over the lens mount, but I wouldnt recommend this, as it provides lots of opportunity to get dust and stuff into the camera. Instead I've devised two ways to quick-mount the card with the hole onto the camera thus minimizing opportunities for dust to get to the sensor.

The first is to make the pinhole in a body cap that fits your camera. It would be hard to get this right the first time, and stocking up on body caps is a bit of a pain, so I drilled a 5/16" hole in the body cap, and then taped the actual card with the pinhole over the hole in the body cap. Because the pinhole is mounted quite close to the camera's focal plane, it results in a fairly wide angle image.

The second way is to use a set of bellows to mount the card onto, and then onto the camera. I picked up a new, non-original equipment set of bellows off eBay for about $50. The bellows bayonets onto the camera, and provides a simple way to mount the card when the bellows is not on the camera. This results in a longer focal length, but with the bellows you now end up with a zoom pin hole camera, which is not something you see every day.

 
Remove these adsRemove these ads by Signing Up
abellows12 months ago

Your
blog gonna be very interesting. Which step do you prefer most easy to install? http://www.avbellows.com/bellows-elevatingplatform.php

richard2nd (author)  abellows12 months ago

The drilled out body cap is easiest and cheapest.

Thanks for your response.

very nice for shots at beach or autum leaves, are these all your pics or do you have more? The road picture in the last group is very impressionistic quite nice actually.

please do a short video of this, worth 4,000 words.
Cool! I'm gonna build this and use at Disneyland! =P
booklvr6305 years ago
Is that the only kind of digital camera it will work with or could it work with any kind?
richard2nd (author)  booklvr6305 years ago
Hi Booklvr630 I think you pretty well have to use a digital SLR, unless you have access to a Leica M8 or something else you can take the lens off of. The trouble with most digital point-and-shoot cameras is that the lens and the sensor are built and wired into a single modual l which you can't remove without wrecking the camera. I don't know what would happen if you put the pinhole right over the lens, I suppose if you had it right dead center the lens wouldn't be doing very much light bending anyway. might be fun to try if you can keep the lens open long enough for the light to come through the pinhole (several seconds I would guess) Good luck
This Instructable and this reply led me to try what you said...putting the pinhole right over the lens of a point and shoot digital camera. I have one that you can change the exposure length of time. It's not a true pinhole camera, but it's still kinda cool.
920334 years ago
Just visited your page...great photos...especially the one of the bridge. You can make an easy tripod base for use on the camera. Use a piece of 1/4" thick plywood or plastic. Drill a 1/4 inch hole in the center. Use double-face carpet tape or layer of rubber cement on face of the wood/plastic base and layer on bottom of camera. Stick together for a permanent bond. Screw your tripod screw into the hole and you're all set. Want 'simpler'? Lightly duct-tape it to tripod. Removes easily. Idea is to hold the camera still and level..this'll do the trick. Great Instructable mind-refresher for me...have been in photography all my lifetime...'1200 Year Old Highlander Immortal', y'know. :-) Which reminds me...Do you know what Jesus said to the Apostles at The Last Supper? "All you guys who want your picture taken, sit on this side of the table with Me". Moses was The First Photographer. He used a Pinhole Camera and Bolt Of Lightning for the FLASH. Came out pretty good, eh?REPLY [flag][delete].
drejansen5 years ago
sorry, I do not understand the reason of pinhole photography.
92033 drejansen4 years ago
Do a Search on "Pinhole Photography" / Pinhole Cameras" for research on its history. Way back when...before Glass Lenses were invented, 'Pinhole' cameras was the void. It creates soft focus photos with unbelievable depth of field (sharpness from closest to furthest object from the 'lens'. Back in the early '50's I converted my 4x5 Speed Graphic Press Camera to Pinhole use for experimenting. With the focusing bellows and ground glass back you can set-up your image...slip the 'pinhole' over the wide open lens and get fabulous photos. They could be exposed on 4x5 sheet film or 4x5 sheet printing paper...developed and have photos regular cameras can't take.
Theoretically, infinite depth of field. Or "it looks cool."
 This picture looks like it was taken with a toy camera like a Holga or a Diana.
richard2nd (author)  haunted_lady4 years ago
 Or is it that no lens at all is just as good as their lenses?
 Ummm their "lens" is a piece of plastic..hahahaha
you can even just out aluminum foil in a filter holder or on an old lenscap and that will suffice then just zoom in and out until you get the desired look
urbanmari5 years ago
My first experience with photography was at camp. Our project required a box that we would paint black--I felt bummed or embarrassed that I didn't have a box, all we had at home was an old Quaker Oats cannister. In fact, mine was the coolest pic that I got to develop myself in the darkroom. Of course, it worked because the photo paper was placed in the cannister and 'absorbed' the curvature showing a really wide and distorted view. I keep wanting to recreate that with my digital but have a mental block of how. Thanks for sharing this. Care to theorize how to effect a cannister look, anyone?
richard2nd (author)  urbanmari5 years ago
Interesting idea urbanmari. The trick would be to find a flexible sensor that was big enough to wrap around the inside of a cylinder/box, and that won't be available for another couple of years yet. In the meantime your best bet would be to take a digital pin hole image and photoshop in some distortion around the edges to get the feel of the oatmeal box camera images.
richard2nd (author) 5 years ago
Thanks Igcalex - Now that I know it all works, I can start paying more attention to the details like image format. I've now mounted the pinhole onto a drilled out body cap which creates a shorter focal length than the bellows, wider field of view and shorter exposure times. I also want to pick up on a previous comment by uguy and try making the pinhole in a piece of foil instead of card stock to see if that will sharpen the image a bit.
lgcalex5 years ago
why do you feel that it is necessary for the bellows? Also try shooting these again in raw
amagriva5 years ago
i think you'll have the same effect breathing on the lens and shooting...
PKM5 years ago
I believe you can get some interesting effects with non-circular holes. Try a short vertical slit- you should get sharp detail in one direction but blur parallel to the slit. Having a bigger aperture should mean you can use shorter exposures. Here's something I always wondered- what happens if you have two pinholes about 1/4" apart? What happens with increasing spacing? Would you get diffraction fringes if they were close enough together?
turnhandle PKM5 years ago
You do get diffraction effects with multiple holes. I tried this way back with a film SLR and got good and really bad results. Multiple holes in various patterns result in "insect eye" multiple images. Lots of fun for way less cost with digital.
hammer98765 years ago
Woo hoo! PT Cruiser!
bbqpope5 years ago
well done, I see you have a spot on dust on you senson....
uguy5 years ago
Sharpness also depends on the accuracy of the pinhole and the thinner the material.. A pinhole in the cardboard or paper is actually pretty fuzzy. Try making a pinhole in some aluminum foil with a nice sharp needle. Don't poke it all the way thru, then sand the back side lightly with a very fine paper. The better the pin hole the greater the depth of view and the sharper the image.

Nice intructable!.
Cool use of the bellows, for the adjustable focal length. One thing to try is put a cover over your viewfinder before you take the exposure, often viewfinders will leak light on such long exposures, which may account as to why several of these pictures are kind of cloudy white. Give it a try.
ve2vfd5 years ago
Cool idea! It would probably be sharper and more contrasty if the pinhole were smaller and you used a longer exposure time.
CameronSS5 years ago
You might try digitally bumping up the contrast to get an image more like a conventional pinhole camera produces.
LinuxH4x0r5 years ago
Cool effect!