build apin-hole lenswitha thin sheet ofbrass, suitablefordigital SLR camera
To make a smaller pinhole than the needle itself, just dent the brass and polish the bump on the other side. <br> <br>If you don't have brass, cut a piece of aluminum from a soda can.
exact, even then I have done so ... <br>This video was the first pin-hole that was building. <br>thanks ...

About This Instructable




More by giocad:Fuji Instax 100 repair kaleidoscopic photos Costruzione Cavalletto a goniometro - Polygonal Frame 
Add instructable to: