camra tazer

Step 2 Cutting

This step is very simple. Cut the wires connecting to the capacitor about halfway between them and the circuitry. Now, place the battery in the place that it was when you took the circuitry out of the camera. Put together the capacitor wires with the same wires they were connected to. BE CAREFUL becasue the capacitor will be charged in about 20 seconds. You will hear a slight high pitched tone, getting higher, like a flash on a regular disposable camera. Now you can either keep the capacitor held with the wires and bend one of the copper strips of metal to mee the others (as seen in the picture) to make the flash go off, or you can take off the capacitor and poke the two pieces of metal on to someone's skin and shock the hell out out of them (my mom wouldent let me say shit lol).

Comments

[Pei0172]

OW! I zapped myself! It's not fun! xD

[whiteNnerdy]

whoever made this ..................has lost thier mind you are my idol :)

[Mad Inventor13]

i got a reading of 298.3 volts off of a camira like one in the picture

[hoody5891]

i did this today all i did was open camera get the flash light cut it off add two wires to make the ones longer turn camera on and it will zap you it zaps so much i got a reading of 199.9volts because it goes down each time then charges up it hard to get a reading i can handle a little charge but not a big one it went all through my body hands feet and all i tensed up and this is way more poweful than a electric fence a good way to do this stnd in a puddle of water with no shoes in the grass or something i reckon it could come close to killing you or prob jsut a heart attack mine uses 2 batterys both alkaliane(dunno spelling)