Print PDF
Favorite
Email
Step 5Frame the window in to fit your new window
i used one side of the track for a template on the 2x4
i had to shim out the 2x4 1/2 inch on one side and 1/4 inch on the other side.
(i built this table and posted instructions in one of my last instructables.)
It has turned out to be a very robust table, i use it for everything. and it can support well over a 1000 lbs.
table
i had to shim out the 2x4 1/2 inch on one side and 1/4 inch on the other side.
(i built this table and posted instructions in one of my last instructables.)
It has turned out to be a very robust table, i use it for everything. and it can support well over a 1000 lbs.
table
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
