Introduction: ChipKIT's COM Port

Picture of ChipKIT's COM Port

This is a Quick instructable on how to figure out which COM Port your computer has assigned to your chipKIT.

Step 1: Plug in ChipKIT

Plug in the chipKIT into your computer. If this is the first time you have ever plugged in the chipKIT into your computer, wait for windows auto install the drivers.

Step 2: Search for Device Manager

Picture of Search for Device Manager

Once the drivers have auto installed, hit the windows key and search for “Device Manager”.

Step 3: Open Device Manager

Picture of Open Device Manager

Open Up Device Manager and click on the "Ports (COM & LPT)" drop down.

Step 4: Unplug the ChipKIT

Picture of Unplug the ChipKIT

Unplug the chipKIT, to verify which COM port it was using. The COM port that disappears, is the COM port your computer has assigned to that particular chipKIT.

Comments

yudije (author)2015-10-16

atas nama agus wahyudi deposit rp 10.000.000

seamster (author)2014-10-20

Thanks for sharing this.

About This Instructable

311views

0favorites

License:

More by dacook13:Analog Discovery PWM and Digital IO Control though LabVIEWControlling the Analog Discovery™ Waveform Generator in LabVIEWManipulating Accelerometer Data In LabVIEW
Add instructable to: