Hallo all , it is my first instructable and I hope you like it.If you find errors ,sorry I can not good english.
This is a simple flashing LED game with Atmega32 Board.By pressing the button S1(PD4),will changed the display and button S4(PD7) will changed the time between the flashing.
What you need
AVR Programmer (AVR USBasp programmer)
miniusb or connector for 5v power
I bought it on ebay.
Programming the Board
To programm the microcontroller, you connect the board to the programmer and upload the file Laufled.hex into the microcontroller .
I have to taken a programmer USBasp(to see in the picture) and the software Khazama AVR Programmer.
to connect the board with the USBasp Programmer, I made an adapter, because the original does not fit.
Here it is connected to the keypad .
The quelcode and the circuit diagram for the board are contain in the christmas led.rar archiv.
I hope you like it.
Please rate this instructable if you like it! :)