Print PDF
Favorite
Email
Step 2Layout
Lay the fan on graph paper, trace it out I added one inch to border.
A few layout marks on the side cover.
Masking tape templet to transfer the holes that needed to be drilled.
Ready for the drill 3/16" for the screws 1.25" hole saw for the vents. paint the off white blood gulch red.
A few layout marks on the side cover.
Masking tape templet to transfer the holes that needed to be drilled.
Ready for the drill 3/16" for the screws 1.25" hole saw for the vents. paint the off white blood gulch red.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
