Introduction: Computer Table
took one pallet, I pulled all the boards and synched them together and 2 1/2 screws to secure back in place added a front board to hide the guts
Step 1: Staining
picked my stain of choice with sealer.I believe this was a black cherry stain.let set and cure in 100' degree temps for about six hours..
Step 2: Assembly
I cut the legs to 3ft and mounted them using 2 inch L brackets on all four sides of the legs. project completion besides stain. one hour
Step 3: Placing
this is the final place and use for this table..
We have a be nice policy.
Please be positive and constructive.