Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Ever want to build your own RC vehicle? Now you can. Your in control of its design, and as simple to use a Legos, because it is Legos. All you need is...
You will need: *standard NXT kit *computer with bluetooth *wiimote
This part is best explained visually. View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
View pictures for guidance.
Plug left cable into port b. The picture is wrong.
Plug the right cable into port c. The picture is wrong.
download glovepie from: http://glovepie.org/glovepie_download.php download the controller: http://www.norgesgade14.dk/bluetoothremote.php After do...
use left and right keys until Bluetooth is centered.
Once you find the Bluetooth icon hit the orange button.
Use the right and left arrows to find On/Off
Select On if not already.
While in the Bluetooth menu find the visibility icon.
Select On if not already selected.
click on the orb or hit super on your keyboard.
Start the control panel.
double click the Bluetooth icon.
Select add device from the menu bar.
After clicking on add new device a window will open. Other devices than your brick may appear. Wait until your NXT brick is found to double click on i...
A window will open asking for the device's password.
Look at your brick. The default password is "1234." You can change the password if you want to. Once you know what password you want to use select the...
Enter pairing password from NXT.
Click connect and windows will install the drivers needed.
Wait until all the drivers have been installed and the brick has been successfully paired to move on.
Go back to the Bluetooth window. Your brick should now appear there. Select add new device.
Make sure your Wii is off. Either hold down both the 1 and 2 buttons or hit sync on the back of the controller.
After clicking on add new device a window will open. Other devices than the wiimote may appear. Wait until your wiimote is found to double click on it...
For the password option. Select pair without password.
The wiimote should pair with your computer and install drivers.
Go to the Bluetooth menu. Right click on your brick, select properties, then settings. After loading you will see which COM port the brick is using.
Double click on the controllers icon.
Enter the com port of the brick. Then click start.
Click enable keyboard in lower right corner of the program.
Double click on the glovepie icon.
Here is the program. Just copy and past if var.run == FALSE then var.run = TRUE HidePie var.hidden = TRUE endif if ((DoubleClicked(Wiimote.Home) an...
hold wiimote with IR camera facing away from you and level. tilt wiimote down to go forward tilt wiimote backward to go backward tilt wiimote right...
Click run and enjoy. I am 17 and if I can do, so can you.
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »