Print PDF
Favorite
Email
Step 7Make a hole in the case for the vacuum hose
I made a hole in the top of the case to run the hose through.
This was easy, since the hole I wanted was at the seam between the halves of the case. I just used nippers to make roughly semicircular holes at each of the mating edges, so that they'd make a roughly round hole when put together.
This was easy, since the hole I wanted was at the seam between the halves of the case. I just used nippers to make roughly semicircular holes at each of the mating edges, so that they'd make a roughly round hole when put together.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
