Instructables

Step 1: Cotton candy machine

Picture of cotton candy machine
Material:
electric motor, battery, (2)orange juice lids, sugar, wire, small piece of wood, electric clip, connector,( found in Homedepots)

Tools: drill, groove plier,knife

Step 2: Orange juice lids

Picture of orange juice lids
find two orange juice lids, clean the inside and outside with sand paper

Step 3: First lids

Picture of first lids
make a large hole as shown below, use the drill to make the hole,

Step 4: Second lids

Picture of second lids
second lids, use the knife to make small hole around the lids,

Step 5: Two lids together

Picture of two lids together
drill three holes around the 2 lids, use the wire to connect the lids together,

Step 6: Put together

Picture of put together
C:\Users\Jenny\Desktop\metapic\IMG_0876.JPG
C:\Users\Jenny\Desktop\metapic\IMG_0883.JPG
connect the lids to the electric motor and to the small piece of wood

Step 7: Yummy cotton candy

Picture of yummy cotton candy
C:\Users\Jenny\Desktop\metapic\IMG_0886.JPG
Heat to melt the sugar and turn it into a liquid
A set of very small holes that the liquid sugar can flow through to form threads of sugar
A spinning head that slings the liquid sugar outward so it is forced through the holes
use a stick to catch the threads
 
Remove these adsRemove these ads by Signing Up
Bowtie411 year ago
How did you heat it?
I believe the sugar was heated separately from the spinner, probably on a stove, then it was poured into the machine.