cube lube

Step 6: Record your best times

leave a comment with how much time you can solve the cube in. or a video. can you beet my time, i bet you can if you try.

Comments

[bigg1101]

i solved the cube in 1 minute and 14 seconds

[the_burrito_master]

with a guide

[technologicalterror]

Do you know how to solve one, if not, go to you tube and type in "how to solve a rubiks cube part 1"

[the_burrito_master]

that was back before i memorized all the algs I now can do it no sweat. i also solve the 5x5x5 and I have a megaminix

[the_burrito_master]

wow takes me 10 mins

[rippinblaise]

takes me about 3 minutes, but i just memorized the algorithms yesterday and i looked up the video the day before....so im a pretty new cuber

[technologicalterror]

Do you possibly now the algorithm ri,di,r,d?

[aphroditedarius]

hey i tried it and it made my cube mor stiff :( i just did it a couple minites ago.  will it loosen up over time?

[bassclarinet23]

Just so you know, Petroleum Jelly contains petroleum. When petroleum and plastic, let's say from a Rubik's cube, the petroleum erodes the plastic...eats away at it, if you will. ;)

[technologicalterror]

I had mine after it was lubricated for about a month and nothing happend.

[mosted1]

Yeah, so its a good thing to put in a stiff cube for a day or 2 so it become looser, and then clear out the jelly next you could use silicon lubricant to really lubricate it.

[technologicalterror]

I'm just a beginner but I was able to solve in 1.33:447, please reply if you like my time.

[sk8master]

takes me about 3 mins but i just learned this week and thats without lube

[sk8master]

now i can solve th cube in 2 mins and 20 seconds

[The Scarlet Tomato]

2 minutes, 16 seconds

[The Scarlet Tomato]

New time. 56 seconds.

[stimky666]

44seconds is my top doing the Beginners Method. 12.4 is my top doing Fridrich.

[dustin_virva]

i need yalls help i just got a rubix cube iv tryed reading how to do it its all so confuseing could some 1 like go step by step with me?

[bassclarinet23]

Go to YouTube and look up "Rubik's Cube Part 1". It is the sole reason I can solve the thing.

[Sorunome]

42 seconds!!

[The Nomlack]

15 secs!

[Sorunome]

damn!

[joetheninja]

45 seconds best, 1 minute average

[ChromeEagle]

Takes me 38.57 secs , used to be 5 seconds more until this, ty man

[Kingspade350]

my best time is 20.82 seconds, got a computer scramble so i couldnt cheat. i usually get 25 sub but this is a pretty good way of doing it. great instructable

[loppilop]

My best time (52 seconds) was actually on a friend's rubik's cube because my own cube was so unfortunately unturnable. lol These instructions are really helpful. Thanks

[lobo_pal]

Average for me without lubing is between 30s and 1 min.

[bballmason6]

I can do my cube in 1:50 but I just learned a week ago.

[pyroman22]

i caN soLVe iT In abOut 50 SecOndS oR So wiThoUt thE luBE anD I use the method from rubiks.com

[vincent1829]

my record was 34.23 seconds my fastest was 23.09 with a fridrich method

[CaptainCrash]

nice instructable. I use personally like using silicon oil because it's easier to apply. I've been getting a bunch of sub 17 averages lately with the Petrus method.

http://www.youtube.com/watch?v=yyLVn3wUNnQ

Practice is key.

[kornfan140]

I solved it in 1:56, but i jus learned how to do it

[shortsonfire79]

i can do it in 40 sec. without the lube stuff. the cube i bought is pretty broken in, and i replaced..took off too, the stickers that were origionally on it, and used differetn colored duckt tape to keep it from peeling. i might try your method, but maybe not.

[charlie14L]

I can solve it in average of about 1:30 ish but i have done in 42.63 seconds for my record