Print PDF
Favorite
Email
Step 2Clamping..
get the dice in a clamp. point the number 1 upwards. you can use this to get a perfectly centered hole.
get your drill ready- if you have a drill press this will be easier..
I used a 3/8 inch bit to drill it. try test drilling into a piece of wood, then try the cap into it..
once you are satisfied with the size, drill into your dice. you are going to have to drill as far as you can without going through. drill small amounts at a time and test fit, or use the depth indicator on your drill press.
get your drill ready- if you have a drill press this will be easier..
I used a 3/8 inch bit to drill it. try test drilling into a piece of wood, then try the cap into it..
once you are satisfied with the size, drill into your dice. you are going to have to drill as far as you can without going through. drill small amounts at a time and test fit, or use the depth indicator on your drill press.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
